PET met is a polyester film metallized with aluminum powder. Polyester film (short: PET film) is already characterized by high strength and surface hardness. Especially with regard to the diffusion density however, the favorable properties can be improved through the use of aluminum powder.
GT New Material Product Page
A PET film metallized with aluminum powder has advantages and disadvantages compared to conventional aluminum foils. The advantages of PET met are in particular, a higher tensile strength and lower production costs. The possible processing speed is significantly higher than that of aluminum foil in the composite material produced by vaporizing aluminum.
This makes PET met, the metallized polyester film particularly useful for applications such as:
- Packaging, especially for moisture or oxidation-sensitive foods such as coffee or instant soups.
- Relative vapor barrier in building insulation.
- Adhesive tapes and labels with relatively high chemical and thermal resistance for applications in vehicle technology or in outdoor areas.
High, but not absolute diffusion density
With PET met, a composite material made of a wafer-thin aluminum layer and a PET film, diffusion values of less than 0.5 cm³/m²/d for oxygen and less than 0.3 g/m²/d for water vapor even at material thicknesses of 10 μm can be achieved. These values are already close to the measurement limits which are indicated for the identification of the absolute diffusion density.
For an absolute diffusion density, however, a classic aluminum foil or a different metal foil has to be used.
PET met combines the positive properties of aluminum and PET film.
In contrast to a laminated composite material, the aluminum coating in PET met only causes a change in the diffusion, optical and electrical properties. The favorable strength values and the low specific weight of the PET film however, remains practically unchanged.
Really just a touch of aluminum
The thickness of the aluminum layer in PET met is so small that the unit, Ångström, which is derived from the atomic diameter is usually used instead of a measurement in μm (micrometers).
A measurement in Ångström can therefore be regarded as a corresponding number of atoms stacked directly above one another. This of course, does not reflect the actual physical conditions, but illustrates the extremely small thickness of the metal support layer.
Absolute values and comparison of the layer thicknesses of metallized PET film
The typical range of aluminum layer thicknesses for a metallized PET film of about 30 Å – 500 Å is about 3 to 50 nm. For comparison, pure gold can be reshaped into Å of thin gold leaf. At this thickness, gold is already slightly translucent and appears green against the light.
PET met foil is always slightly transparent.
Even metallized PET film is not completely opaque. In the case of incident light, this effect cannot be seen due to the silvery reflecting surface. This effect can be varied by printing, dyeing or varnishing as well as by brushing or embossing the PET film.
Effective protection against UV and thermal radiation
The highly reflective surface of a metallized PET film can be used to create an attractive optical effect in packaging as well as a barrier against electromagnetic radiation.
Aluminum vapor-coated PET foil reflects not only visible and infrared light, but also UV radiation. The aluminum coating differs from the silver or gold coatings used for similar purposes. Compared to these metals, the degree of reflection of aluminum is largely independent of the wavelength. The minimum which is still above 85%, is slightly above 800 nm in the near infrared range.
Want more information on Metalized Pet Film? Feel free to contact us.
Effect of film thickness on the reflection factor of PET met
The reflection factor and the optical density of metallized PET film increases proportionally with the thickness of the aluminum coating. The optical density (OD) measured as the logarithm of the incident optical radiation divided by the radiation energy transmitted is typically between 0.25 and 3.5 for PET met.
The thicker the aluminum layer, the higher the optical density and the lower the transparency.
The degree of reflection is thus about 66-99% because, due to the logarithmic scaling, an optical density of 0.3 corresponds to half of the transmitted radiation intensity.
Alteration of properties due to ageing
Just as it is the case with solid pure aluminum, a superficial oxidation takes place in the aluminum coated PET film. It protects the metal from further chemical conversion, both on the side exposed to air as well as the substrate side.
This self-passivation resulting from the formation of transparent aluminum oxide leads to a reduction in the optical density and the electrical conductivity, especially in the first 24 hours after the production of the metallized PET film. It must therefore be taken into account during production if customer specifications are to be observed with regard to these values.
PET met films become more transparent over time.
Since the oxide layer grows to a maximum of 3 to 4 nm irrespective of the thickness of the aluminum coating, the effect is particularly strong with thin coatings. With an approximately 10 nm thick aluminum coating, the optical density can drop from 0.2 to 0.28 within 24 hours and to about half of the original value in the long term.
Typical applications for metallized PET film
Metallized PET film is suitable, for example, in packaging technology as a direct replacement for aluminum foil. For the same film thickness, PET met is characterized by a higher tensile strength and flexural rigidity such that the composite material produced by vaporization of the metal is not as wrinkled as aluminum foil.
PETmet als Ersatz für Alu mit Vor- und Nachteilen.
This can give the package a more presentable look. Despite this, individual packages for candies, which are closed by twisting the film ends (twist closure) are also possible with metallized PET film.
However, aluminum foil also has advantages in certain packaging because, unlike PET met film, it is opaque and guarantees an absolute diffusion density. In general, food packaged with PET met film is therefore not as durable as those packaged with aluminum foil. PET met film is therefore more suitable for foodstuffs with short shelf life, which only stay in the supermarket for a relatively short time before a buyer gets it.
Further application possibilities for metallized PET film in the field of food packaging result from the fact that the extremely fine metal coating changes the electrical conductivity at the surface of the film. This makes PET met visible in metal detectors, but can also be used, for example in the packaging of microwave dishes with low water content, so that the food can absorb more energy and heat up quickly.
In the case of building insulation, the positive influence of the aluminum vaporization on the diffusion resistance as well as on the reflection of thermal radiation is important. Compared with aluminum foil, PET met offers no absolute vapor barrier, but a significantly higher mechanical resistance and a better reflectivity.
An ever-increasing number of products, changing lifestyles & safer food packaging are a few factors that have seen the packaging & labelling industry grow over the past few years. The COVID-19 pandemic added fuel to the fire, making customers realise the importance of packaging that keeps foreign contaminants at bay. The result is there to see, with the compound annual growth rate (CAGR) of this industry in India expected to rise approximately 26.7% in the next 5 years!
Companies are actively looking for a packaging & labelling material that ticks the most boxes. The answer? Metalized packaging & labelling films.
For more Heat Sealable Pet Filminformation, please contact us. We will provide professional answers.
This metallic coating could often be the difference to make a product one step ahead of the rest. The metalized packaging films give way to attractive images & are a fun way to display the product’s unique selling points. This makes it pop out from the rest of the monotonous packets on the aisle. Apart from that, it acts as an additional barrier, preventing the contents inside from interacting with the environment.The experts at Cosmo films noted these benefits & developed metallic films that incorporate all the above advantages and a few more!Used majorly to pack snack items and bakery goods, our co-extruded films support high-quality printing & converting. The ability to be used as a monoweb or laminate on horizontal form fill seals (HFFS) and vertical form fill seals (VFFS) packing machines make it a versatile option.One of its sides is metalized while the other differs in property according to variant. All 5 variants have a multi-layer laminate setup which provides an excellent moisture & oxygen barrier. Properties like a bright white background and oxo-biodegradability come with types like Metalized Cavitated White Opaque Film and Metalized Oxo-Biodegradable Heat Sealable Film, respectively.The experts at Cosmo Films made the Metalized Barrier Films to counter two of the packaging industry’s most crucial problems—food wastage & material consumption.These films have a high moisture barrier to keep the packed food consumable for a long time, hence improving the shelf life. It tackles the problem of material consumption through laminate rationalization.Metalized Barrier Films are solvent-free coated films which make them ideal to be used as an inner seal web in duplex/triplex laminate structures. Its good machinability aids to offer the best results in sandwich lamination.Coming to the realm of labels, these films are extensively used to fulfil the global need for self-adhesive labels. One of the best properties of Metalized PSL Films is their universal printability, which means they can deliver high-quality printing across a wide range of printing processes like flexography, UV, letterpress and offset. Apart from this, they are compatible with UV, water-based and solvent alike.This range is known for its sparkling metallic appearance, high stiffness, and good optics. With a good active moisture resistance, these are ideal for beverages, health, beauty & pharmaceutical products.Metalized Wrap Around Label Films are suitable for people who use cut-stock and reel-fed applications. These BOPP-based films are metalized on one side & heat sealable on the other with a super white opaque look on the latter side.In addition to high optical density, stiffness, & good adhesion, it also has good mould resistance. These are used by reputed beverage brands worldwide.All our variants are made by keeping quality at the core. Don’t know which one’s the best for your needs?
Comments
Please Join Us to post.
0