Don’t underestimate the selection of a home dispensing unit and choose, compare and research so as to buy a product that will exactly suit your needs. There are a number of technical parameters, and even if you don’t know about some of them, they can significantly affect how satisfied you will be with your home chiller in the future.
Candor Product Page
I have a question
Beverage cooling time
One of the key features of the cooler, which ensures that the beverage is cooled for a few minutes after the machine has been switched on and at the same time affects the constant temperature during dispensing. This is due to the unique design of the cooling block with a perfectly tuned cooling circuit.
Will you be dispensing beer in a football locker room, for example, after a match, when thirsty teammates (and maybe even opponents) will gather around you and demand a chilled beverage? Then the speed of the cooling is crucial for you.
Will you be dispensing beer in a football locker room, for example, after a match, when thirsty teammates (and maybe even opponents) will gather around you and demand a chilled beverage? Then the speed of the cooling is crucial for you.
Cooling coil diameter and cooling block volume
The length and diameter of the cooling coil (which directly determine the volume of the cooling block) determine how long after switching on the cooler you can have an optimally cooled beverage for serving and at the same time maintain a constant temperature when dispensing multiple beverages in a short time. These data directly affect the cold rate of the beverage.
If you want to have a stable temperature of the dispensed beverage at all times while the cooler is in operation, regardless of whether you are dispensing one or three beers in a row.
Two parameters are essential for the volume of the cooling block – the diameter of the cooling coil, which should ideally be the same from the dispensing head to the tap. For most of our portable coolers of the PYGMY and KONTAKT model series, the inner diameter is 7 mm. In terms of length, it depends on the specific capabilities of the cooler, but it should be as long as possible. LINDR portable coolers have a cooling block with a total volume from 0.5 l to 4.5 l. It is recommended to verify this data, as it often happens that, for example, the inner diameter of the cooling loop is not the same along the entire length.
Each chiller should indicate how many litres of chilled beverage it can dispense per hour. We state it in the range, and it can be read from the number in the name of the cooler.
Air compressor setting and pressure
To dispense the beer properly, the cooler needs either a compressor or a bottle filled with CO2 or other food gas. (The gas is used especially when the keg is permanently connected.) But most of you will appreciate the built-in air compressor. (Portable coolers with a built-in compressor account for 95% of all portable coolers sold.) Then just turn on the compressor, and you don't have to worry about anything else.
All our coolers that have a built-in compressor are marked with / K in the title. For each chiller, find out if it has a built-in compressor or not. Alternatively, whether the pressure can be regulated.
General equipment and practicality (drip tray, tap wrench)
It is important and practical to know what you are buying with the cooler and if there is everything in the package so that you can put it into operation immediately and not have to buy anything else.
When you buy a LINDR cooler, you automatically get a drip tray, tap (or taps), tap wrench and fittings. In addition, we offer complete sets in our e-shop, in which everything is really needed to put the cooler into operation. Always find out in advance what the equipment of the purchased cooler is.
Test how the cooler will be transported in your hand. Can you lift it? Will you walk 100 metres with it? Does it have a carry handle at all, or do you have to carry it in your arms?
Security and certification
Safety standards are relatively strict and significantly affect the arrangement inside the cooler. The requirements of the standards are evolving, so it is necessary to get recertified every few years and, if necessary, adjust the chillers to suit them. This is extremely financially, time and technologically demanding and only the largest players on the market can practically do it.
If you’re starting to entertain guests more often, or space in your main refrigerator is now at a premium, you might be thinking of buying a beverage refrigerator.
To help you prepare to shop for the unit that’s best for you, we’ve answered some common questions about beverage refrigerators.
1. Why Do I Need a Beverage Refrigerator?
Beverage refrigerators allow you to store your cold drinks in locations away from your main refrigerator. Although sizes vary widely, most of these products are easily portable and can be installed in many places around your home.
Are you interested in learning more about Compressor Cooled Beverage Cooler? Contact us today to secure an expert consultation!
This offers the flexibility of keeping your cold drinks available indoors or outdoors while also saving space in your refrigerator. Additionally, adjustable settings in the majority of available models allow you to chill certain types of products, such as beer or wine, to their optimal temperatures.
2. What Kind of Beverage Refrigerator Do I Need?
Because of the seemingly endless variety of sizes and options, it’s easy to find a model that is perfect for your usage. In general, these kinds of appliances are either freestanding or built in.
Freestanding models can be kept any place indoors or outdoors—depending on type—where there is an appropriate electrical outlet to power them. However, you’ll want to make sure there is plenty of open space around it to allow its compressor to operate properly.
In contrast, built-in models must be installed in an empty space under a counter. These types of refrigerators are specifically designed to safely vent the hot air out and away from themselves during operation.
3. What Sizes/Capacities of Beverage Refrigerators Are Available?
Beverage centers come in small, mid-range, and large sizes. Smaller capacity products hold around 60 cans or less and are perfect for one to two people, while mid-sized models store between 80 and 100 cans. Larger units can hold 150 cans or more.
Keep in mind that as capacity increases, so will the size of the appliance, so be sure you have the room to accommodate your unit of choice. Also, understand that internal capacity can be affected by whether you’re storing canned drinks, small bottles, bottles of wine, or a mix of the three.
4. How Does Location Affect What Type of Beverage Refrigerator I Should Buy?
Where you intend to put the beverage refrigerator is an important factor in determining what type you need to purchase. One of the first questions you’ll need to answer is whether you want your refrigerator outside or inside.
Outdoor beverage refrigerators are excellent for storing cold drinks on your patio, deck, or back porch and can also be great to have near your barbecue grill, swimming pool, or hot tub. If you anticipate having your refrigerator outside, you’ll need a sturdy product with a stainless steel exterior and possible triple-pane glass doors.
On the other hand, models intended for indoor use can either be freestanding or built in. Built-in units are designed for areas where space is at a premium, because they can easily fit under a countertop or in a kitchen island. In some cases, spaces vacated by old appliances such as garbage compactors can provide room for your appliance. For this reason, built-in beverage refrigerators are great for your kitchen or home bar.
5. Can I Store Drinks With Two Different Temperature Requirements?
Dual zone temperature control is a feature that allows two different temperature zones to be set within the same machine. Usually they either have side-by-side or top and bottom compartments and are a brilliant solution for storing wine, which has a higher chilling point, alongside canned beverages.
6. Do Beverage Coolers Have Any Safety Options?
Nearly every company offers models with a safety lock. Typically, these appliances allow you to lock the door with a key, which prevents anyone else from opening the fridge and accessing its contents. This is particularly helpful to prevent anyone underage from getting to alcoholic drinks or to stop theft of expensive collections.
7. What Other Special Features Do They Have?
The most common additional options on beverage centers include digital temperature control, LED lighting, and reversible doors. Digital temperature control allows you to see an exact temperature readout so you can easily adjust it. LED lighting saves energy, often using less current and lasting longer than traditional refrigerator lighting. Reversible doors offer the flexibility of adjusting the item’s front door to hinge and open in either direction.
8. How Much Do These Appliances Cost?
Price points for beverage refrigerators are largely determined by their size and the options included. The least expensive, smaller models can cost just a couple hundred dollars, while higher-end or commercial-grade models can go as high as around $6,000. Within this range, you’ll be able to find a good-quality beverage cooler that matches your preferences and budget for your home use.
9. Do Beverage Refrigerators Make a Lot of Noise?
Generally, these appliances make about as much noise as a standard-sized refrigerator. You might hear some humming from the compressor but normally nothing louder than that during customary operation. If you hear any loud noises, it might be a sign that your beverage refrigerator requires some maintenance.
10. How Do I Maintain My Beverage Refrigerator?
Maintenance of your product will depend on whether it has manual defrost or auto-defrost. A manual defrost unit must be emptied of all contents and then unplugged to allow it to defrost. Additionally, you must defrost it outdoors to avoid potential damage to your home from its leaking water.
But in an auto-defrost product, the internal coils are heated at regular intervals to rid them of any ice or frost build-up. Remember to gently wipe off the coils on the back of the machine about every six months to keep them free of dust build-up as well.
Cleaning this kind of appliance is typically no different than cleaning a standard refrigerator. However, be mindful to check the product manual and follow its instructions for cleaning.
Shop With Confidence
Now that some of your common questions about beverage refrigerators have been answered, finding your appliance should be easier. If you know the options you need, where you want to put the fridge, and your price range, this information will help you find the perfect beverage refrigerator. Use these questions and answers as a guide to help you in your research and comparison shopping.
The company is the world’s best Surround cooling built-in refrigerator supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Comments
Please Join Us to post.
0