How Are PET Plastic Bottles Made?

With competitive price and timely delivery, TEPAI sincerely hope to be your supplier and partner.

You might find yourself questioning exactly what PET plastic must be, but we can guarantee that you have held it in your hand at least once. In this article, we are going to teach you how PET plastic bottles are created during the manufacturing process, and exactly why PET plastic is perfect for the jobs that it does.

 

What are PET plastic bottles?

PET is an abbreviation for polyethylene terephthalate, a substance that is used to create 70% of the soft drink bottles that are manufactured all around the world. This makes it the most popular choice on a worldwide scale, placing itself well ahead of its competitors, aluminium and glass.

Polyethylene terephthalate is a naturally transparent type of thermoplastic that has a wide applicability in the bottling and packaging industries, it can also be used as an engineering plastic when it is combined with other materials. Some people will know it better by the name that it is given due to its applicability in the textile industry, polyester.

 

Where did polyethylene terephthalate come from?

PET was developed more than seven decades ago, by the DuPont chemists. They set out to look for a polymer material that could be applied to the textile industry, and they produced PET during the synthesis of both ethylene glycol and terephthalic acid. They noticed that it was an incredibly strong material without the addition of additives, especially when they took into consideration how lightweight it was.

This strength meant that less material was needed for certain applications, explaining why plastic bottles are made out of material that seems to be relatively thin. Studies have also shown that PET is highly sustainable due to the way that it can be recycled and reused over and over again.

 

Why is polyethylene terephthalate such a useful material?

PET is a useful material due to a combination of different factors. When it comes to the bottling industry, PET is useful due to the amount of chemical resistance that it can offer to a manufacturer. It does not react with food or water, making it perfect for consumer packaging.

It is also almost completely shatterproof, making it much safer to use than a glass alternative. The PET is also much lighter than glass would be, making it easier to transport the finished products.

You also have to consider the fact that polyethylene terephthalate is a widely available substance that is also relatively affordable. After it has been used by the consumer, it can be recycled and reused. This can be done in one of two ways, the plastic will either:

a) go through a series of washing processes or
b) it will be broken down into a set of raw materials.

 

How are PET plastic bottles made?

There is an array of different methods that are used to make PET plastic bottles, but the most common method can be broken down into the following steps:

Step 1: The PET is initially heated up, melting it down into a molten state, before being placed into a tube shaped mould. This process is known as injection moulding. Once the PET has become the same shape as the mould, it is referred to as a parison. The parison is then cut to the correct length after it has been systematically cooled down.

Step 2: The parison is then heated back up and placed into a mould that is shaped like the bottle that is being manufactured. A steel rod is then placed inside of the parison itself, blowing highly pressurized air that stretches the parison into the shape of the mould that surrounds it. The molecules inside of the PET then polarize, and the stretching process leaves you with a plastic bottle.

Step 3: The bottle then has to be quickly cooled down and removed from the mould. There are several different methods that manufacturers frequently use to cool the bottles down quickly. Some of these methods are direct and others are indirect. For example, water can be pumped through the pipes that surround the mould, indirectly cooling the plastic bottle down. Or, carbon dioxide can be used to cool the plastic down via a direct application.

Step 4: Most of the bottles that are produced by manufacturers will then need to be trimmed down to size. If the bottles have been created during a continuous moulding process, then one bottle will need to be trimmed from the one next to it. If the bottles have been created during a non-continuous moulding process, then some excess plastic may have managed to seep through. This would need to be trimmed off.

Step 5: The bottles are now ready to be transported to their destination.

 

 

What is the role of the compressor when creating PET plastic bottles?

One common item exists no matter what method a manufacturer uses to produce PET plastic bottles, a compressor. Numerous different types of compressors are used across the industry, and the compressor is the piece of hardware that requires the most attention.

The compressor is responsible for injecting highly pressurized air into the parison, stretching the parison until it fits perfectly in the bottle-shaped mould that surrounds it. This means that a compressor has to be good enough to accurately control the overall flow of air that goes into the parison, otherwise, the shape will not form.

Traditionally, reciprocating compressors would have been used during the manufacturing process of PET plastic bottles. These compressors used pistons to create a large amount of pressure, but they were no good when it came to cost efficiency. Due to this, most new companies prefer to use centrifugal compressors. These compressors are highly cost efficient, and they utilize a lower amount of pressure.

 

For more information, please visit pet bottle production line.

Do quality tests take place?

Quality tests have to be done regularly during the manufacturing process of PET plastic bottles. These tests are the steps that ensure that the bottles are safe for use, while also checking for things like impact resistance and permeability to carbon dioxide.

Remember that PET has a high recycling rate, and that sustainability shows itself during the manufacturing process. A lot of PET plastic bottles are now manufactured using bottles that have previously been recycled.

Squeezable Innovations: How Tubes are Revolutionizing Packaging

Tube packaging is evolving with trends in sustainability, smart technology, and innovative design. O.Berk's experts provide eco-friendly solutions, helping brands enhance product value and consumer experience while reducing environmental impact.

Understanding Dropper Assemblies: A Focus on Tip Styles

Choosing the right dropper tip style is essential for precision, safety, and user experience. Discover how different tips cater to CBD/THC oils, beauty products, wellness, and food. Elevate your product's performance with the perfect dropper assembly.

Navigating the New Landscape: A Deep Dive into MoCRA's Modernization of Cosmetics Regulation

Explore the Modernization of Cosmetics Regulation Act (MoCRA) of , a landmark legislation transforming the beauty industry's safety and transparency standards. Learn how it impacts brands, consumers, and the future of cosmetics regulation.

Packaging Perfection: How to Choose the Ideal Tube for Your Product

Find the key to perfect packaging with our guide, choosing the ideal tube for your product. Explore materials, printing, and shapes. Ensure integrity with the right closures and seals. Get expert advice for tailored solutions that set your product apart.

How Can I Decorate My Tube?

Learn to decorate tubes with silk screening, hot stamping, and custom colors. Enhance your brand with tailored closures and vibrant packaging designs, focusing on aesthetics for extruded, laminate, or aluminum tubes.

The Anatomy Of A Tube

Dive into the essentials of tube packaging with O.Berk's Packaging Crash Course. This concise guide covers everything from tube anatomy and sealing methods to customization options.

Liner - The Often Overlooked Element Between Your Cap And Bottle

Liner is a piece of material that sits between the cap and the bottle. It's primary function is to offer proper sealing of the product and often times it determines the closure's fit and function viability. Click here to learn more

What Happens When You Recycle?

The two most common recycling processes are single-stream recycling and dual-stream recycling. Single-stream recycling is when all of the recyclables are placed into the same bin for curbside pickup and sorted at the recycling facility.

Aluminum: The Forever Metal In Packaging

Aluminum has been a staple in the home and a cornerstone in the world's recycling stream for generations - click here to learn more about this forever metal's history and its place in a sustainable economy.

Mechanical And Chemical Recycling

In today's Packaging Crash Course, we will cover two recycling methods and their distinct processes that enable us to provide sustainable solutions: Mechanical and Chemical Recycling.

Packing Methods

This list is a quick rundown of some of the most common packing methods utilized in the packaging industry.

Poise - Unit of Measurement for Viscosity

Since its discovery, in the early 19th century the poise (P) has been used as the unit of measurement for viscosity. It has contributed significant advancements in product manufacturing, particularly in food, personal care, and pharma.

The company is the world’s best tailored blow molder supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.